Early Autumn - Apple and Cinnamon

New VapeSafe Early Autumn eLiquid.

Early Autumn - Apples and Cinnamon flavored eLiquid evokes memories of the beginning of fall. The feel of the warm autumn sun on the skin. The sight of vibrant hues of amber and crimson leaves hanging in gently swaying trees soaking up the light. The rustling sound of the breeze slipping through the tree branches tugging and teasing the remaining leaves into releasing their hold and floating downward. The laughing children raking the leaves into piles and then running and jumping into the soft, luscious piles scattering the leaves again. The delicious smells of baking apple and cinnamon pies wafting through open windows. These are the sights, smells and tastes of Early Autumn.

Early Autumn eLiquid by VapeSafe captures the essence of Autumn no matter what season it is. Early Autumn eLiquid is flavorful combination of apples and cinnamon. As with all of the VapeSafe eLiquids, our mixtures are designed to produce nice, heavy vapors and the most succulent flavors. Try Early Autumn eLiquid today!

Early Autumn - Apples and Cinnamon eLiquid


Technology Information:


The DSE701 eCigar looks and works like a real cigar without the offensive smell. The DSE701 Rechargeable eCigar emits a pleasant smell that dissipates within seconds. The large plumes of vapor created by the DSE701 eCigar will, no doubt, please your nicotine cravings.

Unlike a real cigar, the DSE701 eCigar is designed to replace an occasional vape from a cigar or cigarette. Continual, non-stop vaping may overheat the atomizer and cause a premature failure. This will void the warranty on the atomizer. If you use the DSE701 eCigar atomizer under normal conditions, it will last much longer. If you need to replace the atomizer, you will be replacing the entire DSE701 Rechargeable eCigar body.

The arch-shaped atomizer is located inside the DSE701 eCigar body. The DSE701 eCigar atomizer serves as the heating element that vaporizes the eLiquid in the cartridge so that it can be vaped. When vaped, the eCigar cartridge creates large plumes of vapor that appear as if you are smoking a traditional cigarette. These vapors carry a pleasant smell with them until they dissipate a few seconds after vaping.

The eCigar consists of a stainless steel shell, rechargeable lithium battery, micro-electronic circuit, atomizing chamber and red indicator LED at the end of the DSE701 eCigar.

The DSE701 Two-Piece Rechargeable eCigar Kit includes:

The first time you charge the DSE701 eCigar battery, you should let it charge for at least eight hours. All consecutive charges should be from two to three hours long.

The positive end of the battery should be placed closest to the LED at the end of the eCigar. The positive end of the eCigar battery is marked with a plus sign and has a bump on the end of it. Simply push the LED down on the battery and screw it back into place. The LED will light up red when the connection is made.

The batteries will have some charge when you first receive them, but will still need the first, full eight-hour charge. When the battery and charger are plugged into an electrical outlet, the light on the charger will turn red. When the light on the DSE701 charger turns green, it doesn't necessarily mean that the battery is fully charged. Though the LED is a convenient indicator to let you know when a battery is fully charged, it isn't always accurate.

The function recovery mode should be used once or twice every 14 to 28 days. Before performing this function, remove the mouthpiece/cartridge so that it doesn't melt. This function heats the atomizer to a higher than normal temperature. It burns off the eLiquid residue from the atomizer. By doing this, it self-cleans the atomizer and allows for greater vapor production. To use the function recovery mode, insert a thin safety or push pin into the hole, towards the end of the DSE701 eCigar tube. Hold it down for 10 to 20 seconds. The red LED will stay lit and you will hear a low, crackling sound. Vapor will begin to pass out the top of the eCigar tube. If you do not have a thin pin on hand, you can also put the LED end of the DSE701 eCigar tube into your mouth and blow through the hole to heat the atomizer. While blowing steadily for 10 to 20 seconds, you will see large amounts of vapor pass from the end where the mouthpiece would normally be. It is quite fun to watch actually, but don't overdo it. If you overuse this function, the atomizer could be destroyed and not work correctly.

Refill your cartridges often. Depending on how heavily you vape, you may have to add a few drops of eLiquid to your cartridge every 8 to 10 vapes to help keep the cartridge moist. A dry cartridge might cause the atomizer to overheat and become permanently damaged. You also want to be careful that you do not overfill the cartridge, as it could drip down below the atomizer and damage the circuitry.

DSE701 eCigar Specifications:

Related All